Unleash the Power of The Press

Boston

Waltham Accountant Places in Top Quarter of World’s Toughest Mudder Competition

Justin Horr and Nicole Perry
Justin Horr and Nicole Perry

With the same grit and determination required during tax season, Justin Horr, Staff Accountant at Rodman & Rodman CPAs, a full service tax and accounting firm catering to small and medium-sized companies throughout the greater Boston area, completed the World’s Toughest Mudder® 24-hour race held November 14-15th at Lake Las Vegas, Nevada.

Placing 219 overall among approximately 1280 participants, Horr did well in the Male Division 20-24 year-old, placing 9th and completing 10 laps, 50 miles total in 24 hours, 28 minutes and 4 seconds. He was among 28 male and female contestants from Massachusetts.

Horr, a resident of South Easton, MA and native of Granby, CT, competed alongside his aunt, Nicole Perry of Simsbury, CT, who finished 4th in her age group.

World’s Toughest Mudder is an extreme 24-hour obstacle course challenge where athletes are tested to their physical and mental limits competing for Worlds Toughest Mudder title and prizes, while also fundraising for a charity or cause.

“This race, at this magnitude, required a lot of preparation. You have to be ready to tackle different challenges. The course changes in the middle of the night, and you have to adapt,” explained Horr. “It’s almost as stressful as tax season – which is a marathon, not a sprint – where you have to be mentally prepared.”

Horr will be participating in Tough Mudder New England and Spartan Sprint Race in 2016.

About Rodman & Rodman CPAs

Founded in 1961, Rodman & Rodman CPAs provides accounting, tax and business services to small and medium-sized companies throughout New England and beyond. The team specializes in improving business performance, business processes, operations, information technology, finance, and change navigation. Rodman CPAs provides companies with a sustainable financial roadmap through expert partnership/corporate structuring for optimal tax benefit; grant qualification assistance and auditing; ongoing advisory services for federal, state and local tax incentives; and strategic financial planning and management.

The firm has a specialized renewable energy and clean technology accounting and tax services practice, known as the “Green Team” which serves renewable energy clients throughout the U.S. The company is Green Business Certified. For more information, visit their website at www.rodmancpa.com or contact (617) 965-5959.

Waltham Accountant Places in Top Quarter of World’s Toughest Mudder CompetitionRead More

Emerson Bearing Boston Expands Inventory of Super Precision Bearings, Offers eBook Technical Guide

EB_logo2C_tagline_5inEmerson Bearing of Boston, a supplier of bearings and related products catering to Original Equipment Manufacturers (OEM) and Maintenance, Repair and Operations (MRO) markets around the world, has expanded their Super Precision bearing line and offers a complimentary eBook entitled The Art of Precision Bearings: Handling, Mounting, and Technical Guide to Precision Bearings.

High-speed turbochargers, balancing machines and other equipment that needs to operate at radial speeds of 400,000 RPM utilize higher Super Precision ball bearings. Emerson’s expansive Super Precision bearing line now includes Barden, GMN, Nachi and NTN brands. The company also offers a complimentary comprehensive technical guide that may be downloaded from their website emersonbearing.com.

“Super Precision bearings provide the best operational efficiency and can actually extend the lifetime of heavy machinery,” explained Steve Katz, president. “These ‘super’ bearings can facilitate a variety of uses and needs when you match the right bearing to your equipment’s specifications and operation.”

Machinery that uses Super Precision bearings

Super Precision bearings are ideal for applications that demand a high degree of running accuracy, have high system rigidity, need to extend speed capabilities and maintain low heat generation as well as minimize noise and vibration levels.

The optimized dimensional performance and operational capabilities provide a return on investment that exceeds that of standard bearings. Applications where precision bearings provide the greatest benefit include metal cutting and woodworking, super precision lathes, vacuum pumps used in industrial and sterile environments, high speed rolling mill machines, as well as printing, milling and balancing machinery.

For more information about Super Precision bearings, contact Emerson Bearing experts at 800-225-4587. To download Emerson Bearing’s eBook, visit their website  http://info.emersonbearing.com/art-of-precision-bearings.

About Emerson Bearing Boston

Founded in 1957, Emerson Bearing Boston specializes in bearings for OEM and MRO markets throughout the world. The company provides solutions to a variety of industries including: aggregate, concrete, mining, machine tools, electric motor repair, marine, material handling, metal processing, packaging, food processing, paper converting, printing, wind/power generation, recreation, heavy construction, robotics, automation, transportation, wood products, wastewater treatment, pump, compressor and oil field.

Emerson Bearing Boston offers customers a one-stop shopping experience. With an online product catalog with over 3 million bearings – ranging in size from 3mm to tunnel-boring 15-foot-diameter giants; a vast inventory of bearings; worldwide sourcing; a fixed price program; a knowledgeable staff; same day shipping and 24/7 service, Emerson Bearing Boston has become a leading provider of bearings in the U.S. They are the sister company of Action Bearing and maintain headquarters at 201 Brighton Ave. Boston, MA. For more information, visit www.emersonbearing.com or call 800-225-4587.

Emerson Bearing Boston Expands Inventory of Super Precision Bearings, Offers eBook Technical GuideRead More

Rodman CPAs Offer QuickBooks Seminar in January

Rodman CPAs, a full service tax and accounting firm catering to small and medium-sized companies throughout the greater Boston area, will offer a “Preparing for Year End” QuickBooks Seminar on Thursday, January 21, 2016 at their new office in University Office Park, 51 Sawyer Road, Suite 610 in Waltham, MA 02453.

Rodman CPAs’ Advanced QuickBooks Pro Advisers Kathy Parker CPA, Leah Shanahan CPA, Janine O’Connor EA, and Christine McGoldrick will lead the 90-minute seminar. Topics that will be covered include: preparing for year end; reconciling accounts; reviewing and adjusting accounts receivable and accounts payable; 1099s; sales/use tax; and backup procedures.

Registration begins at 7:30 a.m. The seminar runs from 7:45 a.m. to 9:15 a.m. followed by 15-minute question and answer session. Refreshments will be served.

The January QuickBooks seminar is the first in a monthly series. A second on-site QuickBooks seminar entitled “Preparing for the New Year” is scheduled for February 10th. Rodman CPAs’ new 8500 s.f. office features a spacious classroom specifically designed for on-site educational and networking events.

Rodman CPAs has been a member of the QuickBooks ProAdvisor Program since 1999. Having provided hundreds of small to mid-size companies with training and consulting, Rodman CPAs QuickBooks team provides superior services and expertise to meet the accounting software installation, setup, and training needs of businesses.

The fee for the QuickBooks seminar is $45. Registration is now open. To register, visit Rodman CPAs’ Eventbrite page https://www.eventbrite.com/e/quickbooks-seminar-series-preparing-for-year-end-tickets-19897341484.

About Rodman & Rodman CPAs

Founded in 1961, Rodman & Rodman CPAs provides accounting, tax and business services to small and medium-sized companies throughout New England and beyond. The team specializes in improving business performance, business processes, operations, information technology, finance, and change navigation. Rodman CPAs provides companies with a sustainable financial roadmap through expert partnership/corporate structuring for optimal tax benefit; grant qualification assistance and auditing; ongoing advisory services for federal, state and local tax incentives; and strategic financial planning and management.

The firm has a specialized renewable energy and clean technology accounting and tax services practice, known as the “Green Team” which serves renewable energy clients throughout the U.S. The company is Green Business Certified. For more information, visit their website at www.rodmancpa.com or contact (617) 965-5959.

 

Rodman CPAs Offer QuickBooks Seminar in JanuaryRead More

Emerson Bearing Boston Forms New Division as Plastics Processing Heats Up

EB_logo2C_tagline_5in

Due to increased demand nationwide, Emerson Bearing Boston, a supplier of bearings and related products catering to Original Equipment Manufacturers (OEM) and Maintenance, Repair and Operations (MRO) markets around the world, has created a special division to cater to the plastic processing and forming industry. 

In the U.S., the plastics industry is the third largest manufacturing industry and there are more than 16,200 plastics facilities, according to SPI, the plastics industry trade association. Emerson Bearing’s growing plastics clientele spans the nation and includes manufacturers of plastic wine corks, plastic bags, plastic strapping and other products.

Emerson Bearing’s industry specialist, Bill Zylicz, leads the dedicated plastics division. The company caters to plastic processing and forming manufacturers across the U.S. in two major categories – extruder and injection molding machines. In an extruder, the processed plastic is pressed through a nozzle into a profiled die. The extruder gearbox is subject to high torques as well as high radial and axial loads. Injection molding machines are used for the production of parts in large quantities. The screw feed and the linear bearings must be insensitive to heat and vibration and have high basic static and dynamic load ratings.

When it comes to supplying bearings to the plastic processing and forming industry, ensuring that the bearings are able to withstand heat and vibration is just part of the equation. Zylicz assists clients in determining which bearing technologies would be most suitable by taking into consideration the specifications, recommendations, maintenance strategies, fatigue life and wear resistance of bearings in relation to the application. 

“In order to keep with production schedules, regular monitoring, maintenance and replacement of bearings is critical,” said Steve Katz, president of Emerson Bearing. “Manufacturers turn to us for our expertise, competitive pricing and overall reliability. We offer a vast inventory and 24/7 service, which helps them avoid costly down-time.” 

For more information about Emerson Bearing’s Plastics division, contact Bill Zylicz at 866-995-8762 or email bzylicz@emersonbearing.com.

About Emerson Bearing Boston

Founded in 1957, Emerson Bearing Boston specializes in bearings for OEM and MRO markets throughout the world. The company provides solutions to a variety of industries including: aggregate, concrete, mining, machine tools, electric motor repair, marine, material handling, metal processing, packaging, food processing, paper converting, printing, wind/power generation, recreation, heavy construction, robotics, automation, transportation, wood products, wastewater treatment, pump, compressor and oil field.

Emerson Bearing Boston offers customers a one-stop shopping experience. With an online product catalog with over 3 million bearings – ranging in size from 3mm to tunnel-boring 15-foot-diameter giants; a vast inventory of bearings; worldwide sourcing; a fixed price program; a knowledgeable staff; same day shipping and 24/7 service, Emerson Bearing Boston has become a leading provider of bearings in the U.S. They are the sister company of Action Bearing and maintain headquarters at 201 Brighton Ave. Boston, MA. For more information, visit www.emersonbearing.com or call 800-225-4587.

Emerson Bearing Boston Forms New Division as Plastics Processing Heats UpRead More

Rodman CPAs Donate Over 100 Pounds of Food to Newton Food Pantry

Kate Doherty, staff accountant at Rodman CPAs organizes food donations
Kate Doherty, staff accountant at Rodman CPAs organizes food donations

Rodman CPAs of Waltham, a full service tax and accounting firm catering to small and medium-sized companies throughout the greater Boston area, donated more than 100 pounds of food to the Newton Food Pantry on Beacon Street just prior to Thanksgiving.

In a company-wide food drive held among 25 staff members in November, Rodman CPAs were able to fill six large boxes with canned and dry food donations. Each box weighed approximately 20 pounds.

The firm was previously located in Newton for more than two decades and Steve Rodman, president, resides in Newton. The team felt it was important to support the local food panty.

“Community outreach is woven into our company culture and we believe very strongly in giving back and helping others in need,” noted Rodman.

Over the years, Rodman CPAs has supported a number of organizations and causes including Camp Clark, an Old Colony YMCA sponsored recreation camp for children located in Plymouth and Rosie’s Place in Boston.

About the Newton Food Pantry

The Mission of the Newton Food Pantry is to provide nutritionally balanced food to supplement the basic food supply of Newton residents in need, as defined by an established intake process. For more information, contact (617) 928-6021or visit newtonfoodpantry.org.

About Rodman & Rodman CPAs

Founded in 1961, Rodman & Rodman CPAs provides accounting, tax and business services to small and medium-sized companies throughout New England and beyond. The team specializes in improving business performance, business processes, operations, information technology, finance, and change navigation. Rodman CPAs provides companies with a sustainable financial roadmap through expert partnership/corporate structuring for optimal tax benefit; grant qualification assistance and auditing; ongoing advisory services for federal, state and local tax incentives; and strategic financial planning and management.

The firm has a specialized renewable energy and clean technology accounting and tax services practice, known as the “Green Team” which serves renewable energy clients throughout the U.S. The company is Green Business Certified. For more information, email info@rodmancpa.com, visit their website at www.rodmancpa.com or contact (617) 965-5959.

Rodman CPAs Donate Over 100 Pounds of Food to Newton Food PantryRead More

Action Bearing’s MFG Day Event a Success

Bearings image 10 23 15Action Bearing, one of the largest independent distributors in the U.S. specializing in bearings for Original Equipment Manufacturers (OEM) and Maintenance, Repair and Operations (MRO) markets, recently hosted an Open House in celebration of Manufacturing (MFG) Day.

MFG Day, which occurs on the first Friday in October, is a national event that opens the manufacturing industry to the public through educational programs, tours, digital presentations, open houses and more – to inspire the next generation. Action Bearing celebrated MFG Day with an Open House on October 2nd, which provided a forum for discussion regarding current trends and innovations in the bearings industry, and also addressed the challenges faced by manufacturers.

“Bearings are fundamental to most machines and span many industries from robotics, transportation, food packaging and processing, to heavy construction, power generation, steel mills and more,” explained Steve Katz, the company’s president. “We have nearly 60 years’ experience providing solutions to diverse OEM and MRO clients and we were thrilled to host this open house and show visitors what we do.”

Visitors were able to tour Action Bearing’s advanced facilities and attend educational presentations where the company’s bearings experts shared their knowledge of materials, managing load and speed, clearances, specialty bearings, the overall process and more. They were also able to see examples of bearing applications, from robotics to steel mills, and anything in between. Future engineers, designers and other visitors interested in a manufacturing career were able to obtain valuable insight about the bearings industry.

About Action Bearing

A New England staple, Action Bearing has supplied bearings and technical parts to the region and niche markets across the country for over fifty years. Specializing in bearings for Original Equipment Manufacturers and Maintenance, Repair Operations markets, Action Bearing has 25,000 square feet of inventory, an online product catalog with over 3 million bearings, a fixed price program, and bearing experts on hand at all times.

Action Bearing is the sister company of Emerson Bearing of Boston, MA. To learn more about their services, products and immediate shipping opportunities, contact 800-225-4587 or visit www.actionbearing.com.

Action Bearing’s MFG Day Event a SuccessRead More

Waltham CPA Strives to Become World’s Toughest Mudder 2015

Justin Horr
Justin Horr

Justin Horr, Staff Accountant at Rodman & Rodman CPAs, a full service tax and accounting firm catering to small and medium-sized companies throughout the greater Boston area, will compete in the World’s Toughest Mudder® competition in Nevada beginning Saturday, November 14, 2015 at 2 p.m. and continuing through Sunday, November 15, 2015 at 2 p.m.

World’s Toughest Mudder extreme competition is “designed to find the toughest man, woman, and 4+ person team on the planet.” Horr will be competing for the Worlds Toughest Mudder title and First Place Men’s Prize of $10,000, as well as raising money for the Wounded Warrior Project.

Participants must be in top physical condition, as they will be tested to their physical and mental limits in a grueling 24-hour obstacle race challenge at Lake Las Vegas. Horr will face other competitors as well as the challenges of rock and sand terrain, water obstacles, and a cliff dive. Weather will also be a challenge with the extreme temperature change from day to night and the potential for strong winds and/or a sandstorm.

Steve Rodman, CPA, MST, president and the entire Rodman team support their hard‐working colleague who is competing at this professional level on a world stage.

“Rodman CPAs have a similar approach. We roll up our sleeves, dig in and get things done,” noted Rodman.

To support Horr and make a donation to Wounded Warrior Project, visit https://www.crowdrise.com/justinsworldstoughes/fundraiser/justinhorr.

To learn more about Worlds Toughest Mudder 2015, visit https://toughmudder.com/events/worlds-toughest-mudder.

About Rodman & Rodman CPAs

Founded in 1961, Rodman & Rodman CPAs provides accounting, tax and business services to small and medium-sized companies throughout New England and beyond. The team specializes in improving business performance, business processes, operations, information technology, finance, and change navigation. Rodman CPAs provides companies with a sustainable financial roadmap through expert partnership/corporate structuring for optimal tax benefit; grant qualification assistance and auditing; ongoing advisory services for federal, state and local tax incentives; and strategic financial planning and management.

The firm has a specialized renewable energy and clean technology accounting and tax services practice, known as the “Green Team” which serves renewable energy clients throughout the U.S. The company is Green Business Certified. For more information, visit their website at www.rodmancpa.com or contact (617) 965-5959.

Waltham CPA Strives to Become World’s Toughest Mudder 2015Read More

Relocating and Expanding – Rodman & Rodman CPAs move to Waltham

Rodman & Rodman CPAs, a full service tax and accounting firm catering to small and medium-sized companies throughout the greater Boston area, has relocated from Newton to University Office Park, 51 Sawyer Road, Suite 610 in Waltham, MA 02453.

Rodman CPAs’ telephone and fax numbers will remain the same.

After more than two decades at 3 Newton Executive Park in Newton, Rodman CPAs transitioned to their new Waltham office on August 27, 2015. The move, which was prompted by growth, will better accommodate additional staff over the long-term as well as enhance on-site educational and networking capabilities. The new office is 8,500 s.f., which nearly doubles the firm’s space. This will allow for hosting of QuickBooks Workshops, Round Table Groups and other events.

The firm will continue to provide expert tax advisory, accounting, and business strategy services to a diverse array of clients in a wide variety of industries, including renewable energy. Rodman CPAs serve as true business partners helping clients perform and succeed with innovative and cost-effective solutions during each stage of the business lifecycle.

Steve Rodman, CPA, MST, president, announced that the firm will also unveil a new logo and website over the next several months.

“We are excited about our new Waltham office which will better accommodate expansion over the long term, and we are looking to add a few of the best and brightest to meet the increasing needs of clients. As an active community member, we will continue to build and strengthen our outreach efforts in a number of ways,” said Rodman.

About Rodman & Rodman CPAs

Founded in 1961, Rodman & Rodman CPAs provides accounting, tax and business services to small and medium-sized companies throughout New England and beyond. The team specializes in improving business performance, business processes, operations, information technology, finance, and change navigation. Rodman CPAs provides companies with a sustainable financial roadmap through expert partnership/corporate structuring for optimal tax benefit; grant qualification assistance and auditing; ongoing advisory services for federal, state and local tax incentives; and strategic financial planning and management.

The firm has a specialized renewable energy and clean technology accounting and tax services practice, known as the “Green Team” which serves renewable energy clients throughout the U.S. The company is Green Business Certified. For more information, email info@rodmancpa.com, visit their website at www.rodmancpa.com or contact (617) 965-5959.

Relocating and Expanding – Rodman & Rodman CPAs move to WalthamRead More

Emerson Bearing Boston Launches New Website

Emerson Bearing Boston, a supplier of bearings and related products that caters to Original Equipment Manufacturers (OEM) and Maintenance, Repair and Operations (MRO) markets around the world, has recently launched a new generation of their website, EmersonBearing.com.

Emerson Bearing’s website, now in its fourth generation, has been completely redesigned by ThomasNet RPM, a full-service digital agency solution. The site is extremely intuitive with new and improved components that include:

An “Industry Solutions” page provides in-depth information on how bearings are used in different industries. The new “Interchanges Access Library” provides a list of interchanges in one convenient place and is ideal for conducting research or ensuring that all measurements are correct.

A “Technical Toolbox” provides a wide range of resources including access to their library of “Technical Solutions”, which includes eBooks, charts, and datasheets. More than 30 different resources with information on bearing training, set-up for different types of bearings, bearing usage guides, and other industry solutions may be found on the site.

For customers looking for a particular product or conducting research, Emerson Bearing’s enhanced vendor catalog library contains their full product database, making it extremely easy to search for products by category and manufacturer.

Other important components on the site are the “Bearing Detective” to help visitors find just the right bearing needed, as well as an informative blog, video tutorials and monthly specials.

“Our new site design is bold, clean and extremely user-friendly. Navigation is easier and it has a sleeker visual design, which gets users to the content faster. We’ve made it easier than ever for visitors to find exactly what they need,” explained Steve Katz, president of Emerson Bearing.

About Emerson Bearing Boston

Founded in 1957, Emerson Bearing Boston specializes in bearings for OEM and MRO markets throughout the world. The company provides solutions to a variety of industries including: aggregate, concrete, mining, machine tools, electric motor repair, marine, material handling, metal processing, packaging, food processing, paper converting, printing, wind/power generation, recreation, heavy construction, robotics, automation, transportation, wood products, wastewater treatment, pump, compressor and oil field.

Emerson Bearing Boston offers customers a one-stop shopping experience. With an online product catalog with over 3 million bearings ranging in size from 3mm to tunnel-boring 15-foot-diameter giants; a vast inventory of bearings; worldwide sourcing; a fixed price program; a knowledgeable staff; same day shipping and 24/7 service, Emerson Bearing Boston has become a leading provider of bearings in the U.S. They are the sister company of Action Bearing and maintain headquarters at 201 Brighton Ave. Boston, MA. For more information, visit www.emersonbearing.com or call 800-225-4587

Emerson Bearing Boston Launches New WebsiteRead More